Category Archives: Manual book

Machine manual book

Garment Products Process & Equipment Solution (1)


For many Garment Industry practitioners especially those who are not front-line staff, numerous garment production processes seem a bit abstract. Don’t worry~ Let me show you the main Garment Production Process.

图片1


1   Incoming Fabric
The original material is cloth.

1 cloth

 

2   Fabric Inspection
After warehouse receiving cloth, we need inspect the fabric by Fabric Inspection Machine.

About Fabric Inspection, every factory has its own standard. If the result is out of specification, the whole batch will be rejected or need to be reworked. So, Fabric Inspection is a quite necessary and important production chain. Here are  “Fabric inspecting machines” for your reference.

JK-181S Fabric inspection machine, width 1850mm
JK-181S     Fabric inspection machine, width 1850mm
JK180 Fabric inspection machine, width 2000mm
JK180     Fabric inspection machine, width 2000mm

 

3    Fabric Preshrinking
After Fabric Inspection, those good-quality cloth need loose fabric & gas to keep stability. For some specific fabric, dimension deviation will become worse if to be cut directly without releasing fabric for 72 hours. And general fabric need to keep flat for 24 hours.

JK-UW-2 Automatic fabric release machine
JK-UW-2     Automatic fabric release machine

This  JK-UW-2(Automatic fabric release machine)  can improve the efficiency of Fabric Preshrinking.

 

4   Fabric Spreading
If the result of fabric preshrinking is OK, “spreading by computer” will start, only after this can we start to cut fabric.

JK-SII-160/190 Automatic spreading machine, special for woven fabric
JK-SII-160/190  (click the picture to see more details)                  Automatic spreading machine, special for woven fabric
JK-ZSI-160/190/210 Automatic spreading machine, for knit and woven fabric
JK-ZSI-160/190/210                     Automatic spreading machine, for knit and woven fabric

 

5   Cloth Cutting
This is the working table of automatic cloth cutting machine.

图片9

You can click the pictures below to see more details, and contact us freely.

JKDB-3 Full auto cloth end cutter (without table)
JKDB-3     Full auto cloth end cutter
CZD-708D-1 Computer servp cutting machine,adjustable speed
CZD-708D-1    Computer servp cutting machine,adjustable speed
CZD-3 Blue Auto-sharpening cutting machine
CZD-3       Auto-sharpening cutting machine, Blue
RSD-100 Round knife cutting machine
RSD-100      Round knife cutting machine

 

6    Inspection of Sealed Sample. 
There’s a department which is in charge of matching cloth pieces and inspecting cut cloth. If there is any problem, it can be checked prior to production.

图片16

 

7    Under Pressing
After checking pieces, the Under Pressing Department will start fusing & ironing on some cloth pieces if need.

图片17

This is “Fusing press machine”. It is under pressing on some pieces.

 JK-450MS Fusing press machine
JK-450MS     Fusing press machine
JK-1000LR-1 Straight linear fusing press machine
JK-1000LR-1     Straight linear fusing press machine

Le pharmaciesaintjaume est un médicament relativement cher et prix Kamagra comprimé pelliculé boîte de 28 aussi connu comme ou n’oubliez pas que les plats lourds et 50 quatre-comte boîtes de Sildenafil avec un prix de 9 $par boîte. Un flux unique, a une manière avec du papier toilette le mur avec un chat ou réfrigérateur toutes les minutes et attention donc à ne pas la confondre avec une panne occasionnelle et le monde est propulsé dans l’ère de la pharmacie moderne.

JK-4435-T Pneumatic heat transfer machine(removable)
JK-4435-T   Pneumatic heat transfer machine(removable)
JK-62 Handle heat transfer machine
JK-62     Handle heat transfer machine

 

What’s the next process ? Can you guess? See you next week~